home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr12
/
dw0710.zip
/
DW0710.TXT
Wrap
Text File
|
1993-05-05
|
11KB
|
214 lines
======================================================================
Microsoft(R) Product Support Services Application Note (Text File)
DW0710: PRINTING AND PRINT MERGE Q&A
======================================================================
Revision Date: 4/93
3 Pages, No Disk
The following information applies to Microsoft Word for MS-DOS,
version 6.0.
--------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an |
| Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY |
| KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO |
| THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A |
| PARTICULAR PURPOSE. The user assumes the entire risk as to the |
| accuracy and the use of this Application Note. This Application |
| Note may be copied and distributed subject to the following |
| conditions: 1) All text must be copied without modification and |
| all pages must be included; 2) If software is included, all files |
| on the disk(s) must be copied without modification [the MS-DOS(R) |
| utility DISKCOPY is appropriate for this purpose]; 3) All |
| components of this Application Note must be distributed together; |
| and 4) This Application Note may not be distributed for profit. |
| |
| Copyright 1993 Microsoft Corporation. All Rights Reserved. |
| Microsoft and MS-DOS are registered trademarks and Windows |
| is a trademark of Microsoft Corporation. |
--------------------------------------------------------------------
This FastTip presents a series of questions and answers about printing
issues in Microsoft Word version 6.0 for MS-DOS. The issues covered
include print merge, printer setup, and controlling the appearance of
printed documents.
1. Q. In a print merge process, what is the difference between the
main and data documents?
A. The main document contains both the text and the formatting of
the final document to be printed. An example and explanation of
what a main document should look like can be found on page 319
in Chapter 17 of the "Using Microsoft Word" manual.
The data document contains the fields of information that are
inserted in each copy of the main document when you merge the
two files. . An example of what a data document should look
like can be found on page 319 in Chapter 17 of the "Using
Microsoft Word" manual.
2. Q. How do I get rid of the blank lines that occur in my final
merged document when my print merge data field doesn't contain
data?
A. These blank lines occur because the main document allocates a
line for the field even when it contains no data. You can
eliminate these blank lines by using an IF instruction that
checks for data before allocating space for the field in the
print merge. To include an IF instruction in a field, use the
following syntax:
½IF field_name╗½field_name╗
½ENDIF
End each line with a normal carriage return (press the ENTER
key). Note that the ENDIF statement has no closing chevron.
This prevents a blank line. Conversely, a closing chevron
forces a new line (blank line) even if no information is
printed.
Note that the left chevron (½) is created by pressing CTRL+[,
and the right chevron (╗) is created by pressing CTRL+].
Using the IF instruction to eliminate blank areas or lines is
explained on page 350 in Chapter 17 of the "Using Microsoft
Word" manual.
3. Q. My printer is not listed as being supported by Word. How can I
get support for my printer?
A. If you have a modem, printer drivers for your printer may be
available to you through the CompuServe« and GEnie(TM) bulletin
boards. If you do not have an account on either of these
forums, you can call the Microsoft Download Service (MSDL). The
number for the MSDL is (206) 936-6735. If you do not have a
modem, you may need to speak to an engineer.
4. Q. How do I add a new printer to my list of installed printers?
A. To add a new printer to your existing printer setup, you first
need to decompress the desired printer driver file. You can do
this manually (refer to "Decompressing a File Manually" on page
62 of Chapter 5 in the "Getting Started and Printer
Information" guide), or by running the Setup program from your
original program disks. Once the driver file has been
decompressed, you can select the printer driver from within
Word. To select the printer driver, follow these steps:
1. From the File menu in Word, choose Printer Setup.
2. From the Files list, select the .PRD file that corresponds
to the driver file you decompressed.
3. In the Printer Name box, select the correct printer model,
and then choose the OK button.
5. Q. When I try to send a document to my printer, my printer doesn't
respond. Why won't my document print?
A. Generally, if your printer doesn't respond when you try to
print, either Word or your operating system is unable to
communicate with the printer. This may be caused by a hardware
problem or a problem with a print spooler (if you have one).
You can determine if the problem is hardware related by
performing the following test:
1. At the command prompt, type DIR>PRN and then press ENTER.
This sends a list of the current directory to your parallel
printer port.
2. If no directory list prints, type DIR>AUX and then press
ENTER. This sends a directory list to your serial port.
If either of these printer tests succeeds, the printing problem
may be caused by a print spooler or memory-resident software.
To test this, perform a clean system boot, that is, start your
machine without an AUTOEXEC.BAT or CONFIG.SYS file. You do this
by creating a system disk. Use the following steps:
1. With a blank floppy disk in drive A, type the following at
the command prompt
FORMAT A: /S
and then press ENTER. This command formats your floppy disk
and places the system files on it.
NOTE: If you have a version of MS-DOS earlier than 5.0, you
also need to copy the COMMAND.COM file from your MS-DOS
directory onto the floppy disk.
2. When the formatting is complete, turn your computer off, and
then turn it on again. (Be sure the system disk is still in
drive A.) This provides a clean boot, as the system starts
from drive A.
3. Switch to your hard disk by typing C: and then pressing
ENTER.
4. Switch to the Word directory by typing CD WORD, and then
start Word and try printing as you normally would.
If you can now print successfully, a memory-resident program
or device driver may have previously been interfering with
your printer. Try gradually disabling such devices by
"commenting them out" of your CONFIG.SYS and AUTOEXEC.BAT
files. (To comment out a device, type REM before the line
that loads the device.)
If after performing all of these tests you still cannot print,
chances are that you have a hardware connection problem. Before
calling a repair person, check the following:
- Make sure that both ends of the cable between your printer and
computer are firmly plugged in.
- Make sure that your printer is turned on, that it is not displaying
any error messages, and that the "ready" or "on-line" light is
displayed.
- Try turning your printer off for 20 to 30 seconds, turning it back
on, and then try printing again.
If after trying these suggestions you still cannot print, you
should have a repair person examine both the computer and the
printer.
6. Q. When I send a document to my printer, it prints, but the
printout contains strange characters or is incomplete. Why does
this happen, and what can I do about it?
A. If your printout includes strange characters or is incomplete,
the selected printer driver may be incompatible with the
selected printer model. To check this, choose Printer Setup from
the File menu, and compare the .PRD filename in the Printer File
box with the selected printer in the Printer Name box. The printer
name should reflect the printer you are using, or its current
emulation mode. If the printer name matches your printer model,
then you may want to speak to an engineer about the printing
problem you are experiencing.
7. Q. My document prints correctly, but the alignment and spacing of
the printed copy is different from what is shown on the screen.
Why doesn't the printout match what I can see on my screen?
A. If your tabs, tables, or other alignments when printed seem to
be different from what you see on the screen, one of your
screen control settings may need adjusting. To change this
setting so that the screen more accurately reflects what will
be printed, choose Preferences from the View menu, and select
the Line Breaks check box under Show. (An "X" indicates that
this option is selected.) Showing line breaks may cause the
right end of your lines to extend off the right edge of your
screen, but it enables you to identify exactly where each line
will end on the printed copy of your document.
If your printout matches what you see in print preview, then
the difference between your screen display and your printout is
probably due to how Word is set to display your document and
not to an actual printing problem.